Carrer de Martí i Franquès 1, 7º 08028 Barcelona

Published papers

  • Silvello, A.; Cavaliere, P.D.; Albaladejo, V.; Martos, A.; Dosta, S.; Cano, I.G. (2020) Powder Properties and Processing Conditions Affecting Cold Spray Deposition. Coatings; Nº10 (2), Article nº 91 (19 pp.). Doi: 10.3390/coatings10020091 URL:

  • Senderowski, C.; Cinca, N.; Dosta, S.; Cano, I. G.; Guilemany, J. M. (2019). The Effect of Hot Treatment on Composition and Microstructure of HVOF Iron Aluminide Coatings in Na2SO4 Molten Salts. Journal of Thermal Spray Technology; Nº7 (28), pp. 1492-1510 Doi: 10.1007/s11666-019-00886-w

  • Seraj, R. A.; Abdollah-Zadeh, A.; Dosta, S.; Canales, H.; Assadi, H.;Cano, I.G. (2019). The effect of traverse speed on deposition efficiency of cold sprayed Stellite 21. Surface & Coatings Technology; 366, pp. 24-34. Doi: 10.1016/j.surfcoat.2019.03.012

  • Dos Santos, A.; García-Segura, S.; Dosta, S.; Cano, I.G.; Martínez-Huitle, C. A.; Brillas, E. (2019). A ceramic electrode of ZrO2-Y2O3 for the generation of oxidant species in anodic oxidation. Assessment of the treatment of Acid Blue 29 dye in sulfate and chloride media. Separation and Purification Technology; 228 (10 pp.). Doi: 10.1016/j.seppur.2019.115747

  • Seraj, R. A.; Abdollah-Zadeh, A.; Dosta, S.; Assadi, H.; Cano, I.G. (2019). Comparison of Stellite coatings on low carbon steel produced by CGS and HVOF spraying. Surface & Coatings Technology. 372, pp. 299-311. Doi: 10.1016/j.surfcoat.2019.05.022

  • Rincón-López, J.A; Hermann-Muñoz, J.A.; Cinca, N.; Garrido, B.; Cano, I.G.; Guilemany, J.M. Alvarado-Orozco, J.M.; Muñoz-Saldaña, J. (2019) Preferred Growth Orientation of Apatite Crystals on Biological Hydroxyapatite Enriched with Bioactive Glass: A Biomimetic Behavior. Crystal Growth & Design Vol. December(19), pp. 5005-5018. Doi: 10.1021/acs.cgd.9b00268

  • Guillem-Martí, J.; Cinca, N.; Punset, M.; Cano, I.G.; Gil, F. J.; Guilemany, J.M.; Dosta, S.; (2019). Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications. Colloids and Surfaces B-Biointerfaces. 180, pp. 245-253. Doi: 10.1016/j.colsurfb.2019.04.048

  • Vilardell, A.M., Cinca, N., Barriuso, E., Frigola, J., Dosta, S., Cano, I.G. & Guilemany, J.M. (2019). X-ray microtomographic characterization of highly rough titanium cold gas sprayed coating for identification of effective surfaces for osseointegration. Microscopy, vol. Jul (8), pp. 1-4. Doi: 10.1093/jmicro/dfz025

  • Da Silva, F.S., Cinca, N., Dosta, S., Cano, I.G., Guilemany, J.M., Caires, C.S.A., Lima, A.R., Silva, C.M., Oliveira, S.L. & Caires, A.R.L. (2019). Benedetti, A.V., Corrosion resistance and antibacterial properties of copper coating deposited by cold gas spray. Surface & Coatings Technology. Vol. 361 (March), pp. 292-301. Doi: 10.1016/j.surfcoat.2019.01.029

  • Silvello, A., Cavaliere, P., Rizzo, A., Valerini, D., Dosta, S. & Cano, I.G. (2019). Fatigue Bending Behavior of Cold-Sprayed Nickel-Based Superalloy Coatings. Journal of Thermal Spray Technology. Vol. 28 (5), pp. 930-938.

  • Bolelli, G., Dosta, S., Lusvarghi, L., Manfredini, T., Guilemany, J.M. & Cano, I.G. (2019) Building up WC-Co coatings by cold spray: A finite element simulation. Surface & Coatings Technology. Vol. 2019 (374), pp. 674-679.

  • Da Silva, F. S., Cinca, N., Dosta, S., Cano, I. G., Guilemany, J. M., Benedetti, A. V. (2019) Influence of cold gas spray parameters on the corrosion resistance of Al-Al2O3 coatings sprayed on carbon steel. Corrosion Engineering Science and Technology. Vol. 54 (7), pp. 567-574. Doi: 10.1080/1478422X.2019.1637052