Anàlisis del ciclo de vida de la tecnologías del Centro de Proyección Térmica, Universitat de Barcelona El Ing. Edwin Rua realizará el análisis del ciclo de vida de las tecnologías de proyección térmica del grupo CPT de la Universidad de Barcelona, a través de una evaluación de los consumos energéticos de materias primas generados en las diferentes…
Read more
P. Cavaliere, A. Perrone, A. Silvello, A. Laska, G. Blasi and I. Garcia Cano https://doi.org/10.3390/met12050780 Abstract: Cold-spray coatings were produced by FeCoCrNiMn high-entropy alloy powders depositedon carbon steel substrate. The coatings were realized at intermediate temperature and highpressure (at 1100 °C and 7 MPa). The coating microstructure was characterized by scanning electronmicroscopy and X-ray diffraction,…
Read more
Rodolpho Vaz, PhD student at CPT-Universitat de Barcelona, has actively participated in this investigation of corrosion issues in the petrolchemical sector. (https://doi.org/10.1016/j.surfcoat.2022.128398) Abstract: During the regular operation of a petrochemical plant, the degradation and corrosion of some metallic parts frequently occur. These parts are exposed, from the oil extraction to refining processes, to an environment…
Read more
On 15 February, a group of researchers from the Thermal Spray Centre, including its Director, Dr. Irene García, had the opportunity to visit the ITER project, which aims to produce a fusion plasma capable of generating a thermal power ten times greater than that needed to heat the plasma and is located in the French…
Read more
El Dr. Javier Sanchez, Innovation Manager del Centro de Proyección Térmica, ha sido invitado a un encuentro organizado por SOCIEMAT para presentar una ponencia titulada “Recubrimientos obtenidos por proyección térmica. Fundamentos y nuevos campos de aplicación”. Durante su presentación, el Dr. Sanchez ha dado por un lado, una visión global de los fundamentos de las…
Read more
Rodolpho Váz, Alessio Silvello, Pasquale Cavaliere, Sergi Dosta, Irene G. Cano, Metallography, Microstructure, and Analysis, 2021, https://doi.org/10.1007/s13632-021-00758-2 Abstract: The paper analyses the fretting and wear behavior of pure copper and pure titanium coatings realized through cold spray. The coatings were designed and produced by employing processing conditions leading to minimum porosity and high hardness; these…
Read more
B. Garrido, V. Albaladejo, I. G. Cano, S. Dosta, JTST Journal of Thermal Spray Technology, Springer Science Publisher (2022), https://doi.org/10.1007/s11666-021-01312-w Abstract: Cold gas spray (CGS) technology has allowed the development of biofunctional coatings composed of 45S5 and polyetheretherketone (PEEK). The combination of a bioactive glass material embedded in a polymeric matrix makes this composite an…
Read more
A. Silvello, P. Cavaliere, S. Yin, R. Lupoi, I. Garcia Cano, S. Dosta, JTST Journal of Thermal Spray Technology, Springer Science Publisher (2022), https://doi.org/10.1007/s11666-021-01293-w Abstract: HEAs powders, unlike standard alloys which contain one or two base elements, are new alloys that contain multiple elements in the same quantity. These materials have outstanding physical and mechanical…
Read more
Garrido, B.; Dosta, S.; Cano, I.G. (2021). Bioactive glass coatings obtained by thermal spray: Current status and future challenges. Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 60 (2). Doi: https://doi.org/10.1016/j.bsecv.2021.04.001 Open access link: https://www.sciencedirect.com/science/article/pii/S0366317521000327 Abstract: Several inorganic materials such as bioactive glasses, glass–ceramics and calcium phosphates have been shown to be bioactive…
Read more
Our research manager Dr. Alessio Silvello has been invited by the Metals review as Guest Editor for the Special Issue on Cold Gas Spray technology (CGS) under the title Modern Cold Spray Technique-2021. Due to cold spray process is increasingly used for more purposes as deposition efficiency and additive manufacturing, this technique has become of…
Read more
