News

Da Silva, F.S.; De Paula e Silva, A.C.A.; Barbugli, P.A.; Cinca, N.; Cano, I.G.; Guilemany, J.M.; Vergani, G.E.; Benedetti, A.V. (2021). Anti-biofilm activity and in vitro biocompatibility of copper surface prepared by cold gas spray. Surface & Coatings Technology, Article nº 126981. Doi: https://doi.org/10.1016/j.surfcoat.2021.126981 Abstract: In this work the cold gas spray (CGS) technique was…
Read more

Zarei, M.; Nourouzi, S.; Jamaati, R.; García-Cano, I.; Dosta, S.; Sarret, M. (2021). Formation of highly uniform tin oxide nanochannels by electrochemical anodization on cold sprayed tin coatings. Surface & Coatings Technology, Article nº 126978. Doi: https://doi.org/10.1016/j.surfcoat.2021.126978 Abstract: In this study, the self-organized nanoporous tin oxide films were prepared on cold sprayed tin and tin…
Read more

Vaz, R.F.; Silvello, A.; Sanchez, J.; Albaladejo, A.; García-Cano, I. (2021). The Influence of the Powder Characteristics on 316L Stainless Steel Coatings Sprayed by Cold Gas Spray. Coatings, Vol. 11, Nº 2, Article nº 168. Doi: https://doi.org/10.3390/coatings11020168 Open access link: https://www.mdpi.com/2079-6412/11/2/168/htm Abstract: Thermally sprayed 316L stainless steel coatings are commonly used on metallic structures due…
Read more

Last 27th of November, two of our CPT members, the researcher Raisha García and the student Noemí Gavieiro, participated in the NANO Research Night, a workshop organised in the frame of the European Research Night. Moderated by Jordi Díaz-Marcos (CCiTUB, IN2UB, Materials UB, ACCC), the central shaft of this event was explaining what is nanotechnology…
Read more

Bulnes, A.G.; Albaladejo-Fuentes, V.; Cano, I.G.; Dosta, S. (2020). Understanding the Influence of High Velocity Thermal Spray Techniques on the Properties of Different Anti-Wear WC-Based Coatings. Coatings, Vol. 10, Nº 12, Article nº 1157. Doi: 10.3390/coatings10121157 Link: https://www.mdpi.com/2079-6412/10/12/1157 Abstract: This work analyzes the differences found in hard metal coatings produced by two high velocity thermal spray…
Read more

Garrido, B.; Cano, I.G.; Dosta, S. (2020). Adhesion improvement and in vitro characterisation of 45S5 bioactive glass coatings obtained by atmospheric plasma spraying. Surface & Coatings Technology, Article nº 126560. Doi: 10.1016/j.surfcoat.2020.126560 Link: https://www.sciencedirect.com/science/article/pii/S0257897220312305 Abstract: Plasma sprayed bioactive glass coatings were studied using crushed 45S5 bioactive glass powder. It is widely accepted that plasma sprayed…
Read more

Our research group the Thermal Spray Center (CPT), has obtained the new TECNIO certificate for the next period 2020-2023. This certificate is given by Agència per la Competitivitat de l’Empresa -in English, Enterprise Competitiveness Agency (ACCIÓ), a public institution of Generalitat de Catalunya which is focused on promoting the innovation and internationalization of enterprises in…
Read more

Last 28th of October was sucessfully celebrated the symposium on Thermal Spray Technology developed by the Thermal Spray Center (CPT) of the University of Barcelona and the Ceramics Technology Institute (ITC-UJI) of the University Jaume I. This event, moderated by the CPT Director Dr. Irene García Cano, adressed several of the last progresses and advances…
Read more

Dosta, S.; Cinca, N.; Silvello, A.; Cano, I.G. (2020). Alumina Reinforcement of Inconel 625 Coatings by Cold Gas Spraying . Metals, Nº 10, Article nº 1263. Doi: 10.3390/met10091263 Reinforced Inconel 625 coatings have been successfully deposited by means of cold gas spray (CGS). Alumina has been simultaneously sprayed achieving a homogeneous distribution along the deposit…
Read more

The Thermal Spray Center (CPT) is organising a simposia inside the frame of the LVII Congreso Nacional de la SECV, which will be celebrated this year the next 26th to 29th of October in Castellón (Spain). Under the title of Thermal Spray Technologies, the simposia is approaching several thermal spray applications on ceramic surfaces as…
Read more